Plastic materials testing · Data-driven quality+86 152 3147 6158
WANSU / DICHLOROMETHANE IMMERSION TESTER

Dichloromethane immersion tester

Dichloromethane immersion test of plastic pipes, supporting pipe quality evaluation under controlled temperature.

Immersion testTemperature controlPipe quality evaluation
Model selection1 model documents
Product seriesPipe & environment
Sales support +86 152 3147 6158 ↗

Overview

Dichloromethane immersion test of plastic pipes, supporting pipe quality evaluation under controlled temperature.

Applications

01PVC pipes
02Plastic specimens
03Pipe inspection

Models & specifications

Select a model to view its source specifications in Chinese. Confirm options and delivery configuration when requesting a quote.

MODEL / 01

XRL-II二氯甲烷浸渍试验机

Download model document ↗

Introduction & applications

该仪器用于对塑料管材、管件、片材等进行二氯甲烷的浸渍试验。广泛用于管材管件、片材的生产厂,建工质检验验及研究门部。

Technical specifications

XRL-II二氯甲烷浸渍试验机

试样容器规格直径160 mm、高140 mm/2个
仪表控温范围10-50℃
仪表控温精度±0.2℃
仪表显示精度0.1℃
计时器范围0---99分钟
计时器精度0.1秒
外形尺寸长850×宽450×高450mm
重量36kg

产品主要组成

恒温水浴槽、不锈钢容器、试样细孔滤网,控温及计时系统等组成。

试样标准

从管材上截取至少160mm长的管段,在尽量不使材料发热的情况下,用直角车刀仔细的车削试样断面,然后用800号砂纸轻轻打磨,使断面光滑平整。

试样方法

深度应使试样浸没至少30mm

水封层厚度约为20mm

试样恒温时间30分钟,取出后干燥15分钟表面严重破坏(试样爆皮、龟裂、结疤等)(表面破坏 d. S

轻微变化 c. M

没有变化或轻微变化 b. L

表面严重破坏(试样爆皮、龟裂、结疤等)

二氯甲烷浸渍试验是PVC-U管材重要的检测项目,用以表征管材的塑化程度和均一性,管材的塑化程度将直接影响管材的长期静液压性能,对管材的使用寿命有直接影响,不同标准对管材的检测条件要求也不相同。

试剂

二氯甲烷、分析纯 装置:800号砂纸恒温水箱 计时器 不锈钢容器

Applicable standards (per product document)

标准号标准名称
GB/T13526-2007硬聚氯乙烯(PVC-U)管材二氯甲烷浸渍试验方法
ISO 9852-2007硬聚氯乙烯(PVC-U)管材二氯甲烷浸渍试验方法
Read the complete product document

产品资料

XRL-II二氯甲烷浸渍试验机

仪器概述

该仪器用于对塑料管材、管件、片材等进行二氯甲烷的浸渍试验。广泛用于管材管件、片材的生产厂,建工质检验验及研究门部。

适用标准

标准号标准名称
GB/T13526-2007硬聚氯乙烯(PVC-U)管材二氯甲烷浸渍试验方法
ISO 9852-2007硬聚氯乙烯(PVC-U)管材二氯甲烷浸渍试验方法

技术参数

XRL-II二氯甲烷浸渍试验机

试样容器规格直径160 mm、高140 mm/2个
仪表控温范围10-50℃
仪表控温精度±0.2℃
仪表显示精度0.1℃
计时器范围0---99分钟
计时器精度0.1秒
外形尺寸长850×宽450×高450mm
重量36kg

产品主要组成

恒温水浴槽、不锈钢容器、试样细孔滤网,控温及计时系统等组成。

试样标准

从管材上截取至少160mm长的管段,在尽量不使材料发热的情况下,用直角车刀仔细的车削试样断面,然后用800号砂纸轻轻打磨,使断面光滑平整。

试样方法

深度应使试样浸没至少30mm

水封层厚度约为20mm

试样恒温时间30分钟,取出后干燥15分钟表面严重破坏(试样爆皮、龟裂、结疤等)(表面破坏 d. S

轻微变化 c. M

没有变化或轻微变化 b. L

表面严重破坏(试样爆皮、龟裂、结疤等)

二氯甲烷浸渍试验是PVC-U管材重要的检测项目,用以表征管材的塑化程度和均一性,管材的塑化程度将直接影响管材的长期静液压性能,对管材的使用寿命有直接影响,不同标准对管材的检测条件要求也不相同。

试剂

二氯甲烷、分析纯 装置:800号砂纸恒温水箱 计时器 不锈钢容器

试验步骤

将二氯甲烷倒入容器中,其深度至少能使试样浸没至少30mm. 往容器中缓慢加入蒸馏水,使其在二氯甲烷上形成20mm厚的水封层。

将容器置于恒温水箱中,调节水浴温度,当二氯甲烷的温度达到20±5℃时,将试样置网格上浸入容器中,或将试样悬浸在二氯甲烷中,试样浸没深度不得小于30mm,应使试样打磨面浸没在溶液里。试样恒温浸渍20Min, 从容器中取出试样,干燥15min 用肉眼检验试样内外表面及断面,用卷尺和游标卡尺测量内外表面和横断面的破坏长度,记录所有变化情况。

结果表示

变化的类别 采用下列级别评定试样表面的质量变化:a.N。

Downloads

Original Chinese documents include specifications, configuration and operating requirements.

Related standards · 1

These are the standard titles named in the supporting documents (in Chinese). Confirm the test method and edition for the model you choose.

  • GBT 13526-2007 硬聚氯乙烯(PVC-U) 管材 二氯甲烷浸渍试验方法

Selection & support

What information is needed to select a model?

Tell us about your samples, the test method, the measuring range and the configuration you need. Our engineers will confirm a suitable model.

Do all models have the same specifications?

Models and configurations can differ in range, control method and test space. Switch between the models above to see each one.

How do I get a quotation and delivery details?

Send the enquiry form below or call our sales line. Price, delivery time and exact configuration are confirmed by our sales staff according to your needs.

Discuss your testing requirements

Dichloromethane immersion tester

Tell us about your sample and test method to confirm the model, quotation and delivery.

+86 152 3147 6158
948064885@qq.com

Your enquiry is saved to the Wansu service desk. If the service cannot be reached, an email draft is prepared instead.

Dichloromethane immersion tester