Plastic materials testing · Data-driven quality+86 152 3147 6158
WANSU / CHARPY IMPACT TESTER

Charpy impact tester

Determines the Charpy impact properties of materials. Pendulum and support configurations are chosen by specimen size, notch type and test energy.

Charpy impactNotched and unnotched specimensToughness evaluation
Model selection4 model documents
Product seriesMechanical & impact
Sales support +86 152 3147 6158 ↗

Overview

Determines the Charpy impact properties of materials. Pendulum and support configurations are chosen by specimen size, notch type and test energy.

Applications

01Rigid plastics
02Engineering plastics
03Non-metallic materials

Models & specifications

Select a model to view its source specifications in Chinese. Confirm options and delivery configuration when requesting a quote.

MODEL / 01

XJJD-50F简支梁复合冲击试验机

Download model document ↗

Introduction & applications

XJJD系列冲击试验机主要用于硬质塑料(包括板材、管材、塑料异型材)、增强尼龙、玻璃钢、陶瓷、铸石、电绝缘材料等非金属材料冲击韧性的测定。该机具有结构简单、操作方便、数据准确可靠,彩色液晶触摸屏显示,PLC控制,配微型打印机,外观精美等特点,是化工行业、科研单位、大专院校质量检测等部门理想的试验设备。

Technical specifications

XJJD-50F 简支梁复合冲击试验机

冲 击 速 度≤5J:2.9m/s;>5J:3.8m/s
冲 击 能 量2J , 4J , 5J、7.5J,15J ,25J,50J
冲击摆力矩Pd2=1.07180Nm
Pd4=2.14359Nm
Pd5=2.67949Nm
Pd7.5=4.01924Nm
Pd15=8.03848Nm
Pd25=13.39746Nm
Pd50=26.79492Nm
摆锤预扬角150°
打击中心距≤5J:230mm;>5J:395mm
冲击刀刃圆角半径(2±0.5)mm
冲击刀刃夹角(30±1)°
钳口圆角半径(1.0±0.1)mm
钳口支撑线间距离62
电源电压220VAC-15%~220VAC+10%,50Hz (单相三线制)
仪器尺寸长700mm×宽400mm×高850mm

Applicable standards (per product document)

标准号标准名称
GB/T1043.1-2008塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验
GB/T1043.2-2018塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验
GB/T 2611-2022试验机 通用技术要求
GB/T21189-2007塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验
IS0179-2Plastics-Determination of Charpy impact properties
Part 2: Instrumented impact test

Configuration

XJJD-50F 简支梁复合冲击试验机

主机一台
2J、7.5J、15J基锤各一把
4J、5J、25J、50J砝码各一个
对中样板一个
内六角扳手M4、M5、M6各一个
电源线一条
地脚四个
Read the complete product document

产品资料

XJJD-50F简支梁复合冲击试验机

仪器概述

XJJD系列冲击试验机主要用于硬质塑料(包括板材、管材、塑料异型材)、增强尼龙、玻璃钢、陶瓷、铸石、电绝缘材料等非金属材料冲击韧性的测定。该机具有结构简单、操作方便、数据准确可靠,彩色液晶触摸屏显示,PLC控制,配微型打印机,外观精美等特点,是化工行业、科研单位、大专院校质量检测等部门理想的试验设备。

适用标准

标准号标准名称
GB/T1043.1-2008塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验
GB/T1043.2-2018塑料 简支梁冲击性能的测定 第2部分:仪器化冲击试验
GB/T 2611-2022试验机 通用技术要求
GB/T21189-2007塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验
IS0179-2Plastics-Determination of Charpy impact properties
Part 2: Instrumented impact test

工作原理

用已知能量的摆锤打击支承成水平梁的试样,由摆锤一次冲击使试样破坏。冲击线位于两支座正中,以冲击前、后摆锤的能量差,确定试样在破坏时所吸收的能量。然后按试样原始横截面积计算其冲击强度。

试样类型

试样类型、尺寸、支撑线间距离(单位:mm)

试样类型长 度(l)宽 度(b)厚度(d)支撑线间距离L
180±210±0.54±0.262
225h
11h或13h
10或15320h
6h或8h

3

技术参数

XJJD-50F 简支梁复合冲击试验机

冲 击 速 度≤5J:2.9m/s;>5J:3.8m/s
冲 击 能 量2J , 4J , 5J、7.5J,15J ,25J,50J
冲击摆力矩Pd2=1.07180Nm
Pd4=2.14359Nm
Pd5=2.67949Nm
Pd7.5=4.01924Nm
Pd15=8.03848Nm
Pd25=13.39746Nm
Pd50=26.79492Nm
摆锤预扬角150°
打击中心距≤5J:230mm;>5J:395mm
冲击刀刃圆角半径(2±0.5)mm
冲击刀刃夹角(30±1)°
钳口圆角半径(1.0±0.1)mm
钳口支撑线间距离62
电源电压220VAC-15%~220VAC+10%,50Hz (单相三线制)
仪器尺寸长700mm×宽400mm×高850mm

仪器配置

XJJD-50F 简支梁复合冲击试验机

主机一台
2J、7.5J、15J基锤各一把
4J、5J、25J、50J砝码各一个
对中样板一个
内六角扳手M4、M5、M6各一个
电源线一条
地脚四个

Downloads

Original Chinese documents include specifications, configuration and operating requirements.

Related standards · 4

These are the standard titles named in the supporting documents (in Chinese). Confirm the test method and edition for the model you choose.

  • GBT 21189-2007 塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验
  • GBT1043.1-2008简支梁冲击性能的测定第1部分非仪器化冲击试验
  • GBT1043.2-2018塑料 简支梁冲击性能的测定 第2部分仪器化冲击试验
  • GB∕T2611-2022试验机通用技术要求

Selection & support

What information is needed to select a model?

Tell us about your samples, the test method, the measuring range and the configuration you need. Our engineers will confirm a suitable model.

Do all models have the same specifications?

Models and configurations can differ in range, control method and test space. Switch between the models above to see each one.

How do I get a quotation and delivery details?

Send the enquiry form below or call our sales line. Price, delivery time and exact configuration are confirmed by our sales staff according to your needs.

Discuss your testing requirements

Charpy impact tester

Tell us about your sample and test method to confirm the model, quotation and delivery.

+86 152 3147 6158
948064885@qq.com

Your enquiry is saved to the Wansu service desk. If the service cannot be reached, an email draft is prepared instead.

Charpy impact tester