Plastic materials testing · Data-driven quality+86 152 3147 6158
WANSU / HDT AND VICAT TESTER

HDT and Vicat tester

Determines the heat deflection temperature and Vicat softening temperature of polymers. The series offers different numbers of specimen stations and control options, for material development and thermal-property testing.

Heat deflection temperatureVicat softening temperatureHeat resistance evaluation
Model selection6 model documents
Product seriesThermal & analysis
Sales support +86 152 3147 6158 ↗

Overview

Determines the heat deflection temperature and Vicat softening temperature of polymers. The series offers different numbers of specimen stations and control options, for material development and thermal-property testing.

Applications

01Thermoplastics
02Engineering plastics
03Insulating materials

Models & specifications

Select a model to view its source specifications in Chinese. Confirm options and delivery configuration when requesting a quote.

MODEL / 01

XRW-300A-3热变形维卡软化点温度测定仪

Download model document ↗

Introduction & applications

仪器概述

本系列热变形、维卡软化点温度测定仪主要用于非金属材料如塑料、橡胶、尼龙、电绝缘材料等的热变形分析及维卡软化点温度的测定,是化工企业、科研单位、大专院校等部门理想的测试工具。

本仪器满足GB/T1633-2025《热塑性塑料维卡软化点温度的测定》中关于热塑性塑料维卡软化点温度的测定,参照GB/T1634.1-2025《塑料 负荷变形温度测定(通用试验方法)》中关于塑料 负荷变形温度试验方法。使用本仪器前请仔细阅读本说明书。

参数简介

本机架次:设备仪器上最多架数,设置范围1-3架;

采温通道数:默认1(单路采温模式);也可以设置成和架数一样(一架一路采温模式);

重力加速度:默认9.810m/s2,可根据当地实际情况修改;

系统语言:可选择中文简体和英文;

系统时钟:出厂设定,如出现偏差或异常,可进入该界面修改,该时间主要用于历史存储和报告打印时的日期时间显示。

Technical specifications

XRW-300A-3热变形维卡软化点温度测定仪

试样架提取方式手动
控制方式单片机
显示方式10寸彩色触摸屏
控温范围室温~300℃
升温速率A速度:5±0.5℃/6min;B 速度:12±1.0℃/6min。
温度准确度±0.5℃
温度测量点1个
试样工位3工位
变形分辨率0.001mm
变形测量范围0~10mm
试样支承跨距64mm、100mm(美标可调节尺寸)
加热介质甲基硅油;闪点300℃以上、200厘斯以下(客户自备)
冷却方法150℃以上自然冷却,150℃以下水冷或自然冷却;
仪器尺寸长800mm×宽500mm×高750mm
所需空间前后1m,左右0.6m
电源4500VA 220VAC 50H

Configuration

XRW-300A-3热变形维卡软化点温度测定仪

主机1台
电源线1根
试样架3个
数显千分表3支
热变形压头3个
维卡压针3个
装配工具M3六角扳手1把

砝码箱

A码1000g12个
B码900g3个
C码500g3个
D码200g6个
E码100g3个
F码50g3个
G码20g6个
H码10g3个
I码5g3个
T码2g6个
W码60(负载杆)3个

PAGE 31

PAGE \* MERGEFORMAT 1

Read the complete product document

产品资料

XRW-300A-3热变形维卡软化点温度测定仪

仪器概述

本系列热变形、维卡软化点温度测定仪主要用于非金属材料如塑料、橡胶、尼龙、电绝缘材料等的热变形分析及维卡软化点温度的测定,是化工企业、科研单位、大专院校等部门理想的测试工具。

本仪器满足GB/T1633-2025《热塑性塑料维卡软化点温度的测定》中关于热塑性塑料维卡软化点温度的测定,参照GB/T1634.1-2025《塑料 负荷变形温度测定(通用试验方法)》中关于塑料 负荷变形温度试验方法。使用本仪器前请仔细阅读本说明书。

技术参数

XRW-300A-3热变形维卡软化点温度测定仪

试样架提取方式手动
控制方式单片机
显示方式10寸彩色触摸屏
控温范围室温~300℃
升温速率A速度:5±0.5℃/6min;B 速度:12±1.0℃/6min。
温度准确度±0.5℃
温度测量点1个
试样工位3工位
变形分辨率0.001mm
变形测量范围0~10mm
试样支承跨距64mm、100mm(美标可调节尺寸)
加热介质甲基硅油;闪点300℃以上、200厘斯以下(客户自备)
冷却方法150℃以上自然冷却,150℃以下水冷或自然冷却;
仪器尺寸长800mm×宽500mm×高750mm
所需空间前后1m,左右0.6m
电源4500VA 220VAC 50H

程序界面

设备上电后,测试系统完成自检后进入如下图所示界面:

系统环境设置

点击主界面的“系统环境”图标,弹出密码界面,输入密码“888888”,单击“OK”,进入“系统环境设置”界面,如下图:

参数简介

本机架次:设备仪器上最多架数,设置范围1-3架;

采温通道数:默认1(单路采温模式);也可以设置成和架数一样(一架一路采温模式);

重力加速度:默认9.810m/s2,可根据当地实际情况修改;

系统语言:可选择中文简体和英文;

系统时钟:出厂设定,如出现偏差或异常,可进入该界面修改,该时间主要用于历史存储和报告打印时的日期时间显示。

仪器配置

XRW-300A-3热变形维卡软化点温度测定仪

主机1台
电源线1根
试样架3个
数显千分表3支
热变形压头3个
维卡压针3个
装配工具M3六角扳手1把

砝码箱

A码1000g12个
B码900g3个
C码500g3个
D码200g6个
E码100g3个
F码50g3个
G码20g6个
H码10g3个
I码5g3个
T码2g6个
W码60(负载杆)3个

PAGE 31

PAGE \* MERGEFORMAT 1

Downloads

Original Chinese documents include specifications, configuration and operating requirements.

Related standards · 5

These are the standard titles named in the supporting documents (in Chinese). Confirm the test method and edition for the model you choose.

  • GB T 1634.1-2025塑料 负荷变形温度的测定 第1部分:通用试验方法
  • GB T1634.2-2019塑料 负荷变形温度的测定 第2部分塑料和硬橡胶
  • GBT 8802-2001热塑性塑料管材、管件维卡软化温度的测定
  • GBT1634.3-2004塑料负荷变形温度的测定第3部分高强度热固性层压材料
  • GB_T 1633-2025塑料热塑性塑料 维卡软化温度(VST)的测定

Selection & support

What information is needed to select a model?

Tell us about your samples, the test method, the measuring range and the configuration you need. Our engineers will confirm a suitable model.

Do all models have the same specifications?

Models and configurations can differ in range, control method and test space. Switch between the models above to see each one.

How do I get a quotation and delivery details?

Send the enquiry form below or call our sales line. Price, delivery time and exact configuration are confirmed by our sales staff according to your needs.

Discuss your testing requirements

HDT and Vicat tester

Tell us about your sample and test method to confirm the model, quotation and delivery.

+86 152 3147 6158
948064885@qq.com

Your enquiry is saved to the Wansu service desk. If the service cannot be reached, an email draft is prepared instead.

HDT and Vicat tester