Plastic materials testing · Data-driven quality+86 152 3147 6158
WANSU / MELT FLOW RATE TESTER

Melt flow rate tester

Determines the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics, for raw-material inspection, formulation research and processing quality control.

MFR / MVRMaterial flow propertiesRaw material and batch inspection
Model selection2 model documents
Product seriesThermal & analysis
Sales support +86 152 3147 6158 ↗

Overview

Determines the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics, for raw-material inspection, formulation research and processing quality control.

Applications

01Thermoplastics
02Polyethylene and polypropylene
03Engineering plastics

Models & specifications

Select a model to view its source specifications in Chinese. Confirm options and delivery configuration when requesting a quote.

MODEL / 01

XNR-400B熔体流动速率仪

Download model document ↗

Introduction & applications

本机既适用于熔融温度较高的聚乙烯、聚芳砜、氟塑料、尼龙等工程塑料,也适用于聚乙烯、聚苯乙烯、聚丙烯ABS树脂、聚甲醛树脂等熔融温度较低的塑料测试。特别适用于大专院校、科研单位、各质检机构、塑料生产企业、塑料制品及石油化工行业使用。

Technical specifications

XNR-400B熔体流动速率仪

控温范围室温~450℃,升温速度快、超调量极小
温度显示示值误差≤±0.3℃,恒温精度高
温度显示分辨率0.1℃
恢复时间≤4min,在填料之后能快速恢复恒温状态
显示方式彩色触摸屏幕显示、操作
测量方法质量法、体积法
计时精度0.01秒
切料方式手动、自动两种种切料方式
切样时间间隔1—999S
口模材质碳化钨
口模直径2.095±0.005 mm
仪器尺寸长260mm×宽400mm×高570mm
所需空间前后0.5m, 左右0.5m

Features

一机多能,计时、切料、结果打印自动化。控制软件可实现对参数的设定、恒温控制、切料、计量校准、定时及MFR结果的显示,试验结束可以进行试验数据的查询与打印等功能。为防止误操作,部分重要操作需使用密码验证。

全彩色触摸屏、中英文双语操作界面。该仪器结构紧凑、美观、控制系统稳定。升温速度快、超调量极小;恒温精度高;在填料之后,能迅速恢复恒温状态。具有上限温度保护、恒温提示、操作提示等功能。在国内处于较高水平,并通过欧盟产品CE认证。

Applicable standards (per product document)

标准号标准名称
GB/T3682.1-2018热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分:标准方法
GB/T3682.2-2018热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分:对时间-温度历史和湿度敏感的材料的试验方法
ISO 1133-1:2022Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method

Configuration

XNR-400B熔体流动速率仪

主机1台
电源线1根
装料漏斗1个
取样盘1个
附件箱一活塞杆1个
口模Φ2.095mm1个
水平仪1个
清洗杆1个
加料顶杆1个
口模清理棒1个
刮刀片1个

附件箱二

标准试验负荷(kg共八级)1级:0.325kg=(活塞杆+砝码托盘+隔热套+1号砝码体)=3.187N
2级:1.200 kg=(0.325+2号0.875砝码)=11.77 N
3级:2.160 kg=(0.325+3号1.835砝码)=21.18 N
4级:3.800 kg=(0.325+4号3.475砝码)=37.26 N
5级:5.000 kg=(0.325+5号4.675砝码)=49.03 N
6级:10.000 kg=(0.325+5号4.675砝码+6号5.000砝码)=98.07 N
7级:12.500 kg=(0.325+5号4.675砝码+6号5.000+7号2.500砝码)=122.58 N
8级:21.600 kg=(0.325+2号0.875砝码+3号1.835+4号3.475+5号4.675+6号5.000+7号2.500+8号2.915砝码)=211.82 N4)
Read the complete product document

产品资料

XNR-400B熔体流动速率仪

仪器概述

本机既适用于熔融温度较高的聚乙烯、聚芳砜、氟塑料、尼龙等工程塑料,也适用于聚乙烯、聚苯乙烯、聚丙烯ABS树脂、聚甲醛树脂等熔融温度较低的塑料测试。特别适用于大专院校、科研单位、各质检机构、塑料生产企业、塑料制品及石油化工行业使用。

适用标准

标准号标准名称
GB/T3682.1-2018热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第1部分:标准方法
GB/T3682.2-2018热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分:对时间-温度历史和湿度敏感的材料的试验方法
ISO 1133-1:2022Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 1: Standard method

功能特点

一机多能,计时、切料、结果打印自动化。控制软件可实现对参数的设定、恒温控制、切料、计量校准、定时及MFR结果的显示,试验结束可以进行试验数据的查询与打印等功能。为防止误操作,部分重要操作需使用密码验证。

全彩色触摸屏、中英文双语操作界面。该仪器结构紧凑、美观、控制系统稳定。升温速度快、超调量极小;恒温精度高;在填料之后,能迅速恢复恒温状态。具有上限温度保护、恒温提示、操作提示等功能。在国内处于较高水平,并通过欧盟产品CE认证。

技术参数

XNR-400B熔体流动速率仪

控温范围室温~450℃,升温速度快、超调量极小
温度显示示值误差≤±0.3℃,恒温精度高
温度显示分辨率0.1℃
恢复时间≤4min,在填料之后能快速恢复恒温状态
显示方式彩色触摸屏幕显示、操作
测量方法质量法、体积法
计时精度0.01秒
切料方式手动、自动两种种切料方式
切样时间间隔1—999S
口模材质碳化钨
口模直径2.095±0.005 mm
仪器尺寸长260mm×宽400mm×高570mm
所需空间前后0.5m, 左右0.5m

仪器配置

XNR-400B熔体流动速率仪

主机1台
电源线1根
装料漏斗1个
取样盘1个
附件箱一活塞杆1个
口模Φ2.095mm1个
水平仪1个
清洗杆1个
加料顶杆1个
口模清理棒1个
刮刀片1个

附件箱二

标准试验负荷(kg共八级)1级:0.325kg=(活塞杆+砝码托盘+隔热套+1号砝码体)=3.187N
2级:1.200 kg=(0.325+2号0.875砝码)=11.77 N
3级:2.160 kg=(0.325+3号1.835砝码)=21.18 N
4级:3.800 kg=(0.325+4号3.475砝码)=37.26 N
5级:5.000 kg=(0.325+5号4.675砝码)=49.03 N
6级:10.000 kg=(0.325+5号4.675砝码+6号5.000砝码)=98.07 N
7级:12.500 kg=(0.325+5号4.675砝码+6号5.000+7号2.500砝码)=122.58 N
8级:21.600 kg=(0.325+2号0.875砝码+3号1.835+4号3.475+5号4.675+6号5.000+7号2.500+8号2.915砝码)=211.82 N4)

环境要求

环境温度:10℃—40℃的范围内;

环境相对湿度在30%—80%以内;

Downloads

Original Chinese documents include specifications, configuration and operating requirements.

Related standards · 2

These are the standard titles named in the supporting documents (in Chinese). Confirm the test method and edition for the model you choose.

  • GBT3682.1-2018塑料热塑性塑料熔体质量流动速率MFR和熔体体积流动速率MVR的测定第1部分标准方法
  • GBT3682.2-2018塑料热塑性塑料熔体质量流动速率(MFR)和熔体体积流动速率(MVR)的测定 第2部分:对时间-温度历史和(或)湿度敏感的材料的试验方法

Selection & support

What information is needed to select a model?

Tell us about your samples, the test method, the measuring range and the configuration you need. Our engineers will confirm a suitable model.

Do all models have the same specifications?

Models and configurations can differ in range, control method and test space. Switch between the models above to see each one.

How do I get a quotation and delivery details?

Send the enquiry form below or call our sales line. Price, delivery time and exact configuration are confirmed by our sales staff according to your needs.

Discuss your testing requirements

Melt flow rate tester

Tell us about your sample and test method to confirm the model, quotation and delivery.

+86 152 3147 6158
948064885@qq.com

Your enquiry is saved to the Wansu service desk. If the service cannot be reached, an email draft is prepared instead.

Melt flow rate tester